Dhalle M., Chaud X., Senatore C., Song J., Fazilleau P., Debray F., Lecrevisse T., Herrmannsdorfer T., Smara A., Paillot K.
Dhalle M., Tassisto M., Laan D.v., Otten S., Radcliff K., Kate H.J., Weiss J., Nilsson E., Ybanez L., Rivenc J., Donges S.A., Leferink J., Rouquette J.F., Fallouh C., Gacnik D.
Dhalle M., Laan D.C., Weiss J.D., Kate H.H., Otten S., Radcliff K., Nilsson E., Rivenc J., Donges S.A., Leferink J., Gaenik D., Bruggenwirth S., Rouquette J.-F.
Ключевые слова: aviation application, HTS, REBCO, CORC cables, ac losses, experimental results, numerical analysis
Dhalle M., Laan D.C., Tassisto M., Kate H.t., Otten S., Berg F., Radcliff K., Weiss J., Nilsson E., Ybanez L., Rivenc J., Donges S.A., Rouquette J.F., Fallouh C., Delarche A.
Ключевые слова: magnetic separation, design, prototype, LTS, NbTi, magnets, gradient, thermal properties, heat loads, cryostat, current leads, HTS, Bi2223, tapes, cooling technology, temperature distribution, conduction cooled systems
Ключевые слова: shipboard applications, HTS, REBCO, coated conductors, cables, coils, degaussing system, prototype, design, experimental results, numerical analysis
Ключевые слова: magnetic separation, gradient, LTS, NbTi, coils racetrack, magnetic systems, design parameters
Ключевые слова: detector, magnets, coils solenoidal, cryogenic systems, cryostat, design, design parameters, LTS, NbTi, Rutherford cables
Dhalle M., Bauer M., Kellers J., Wessel S., Buhrer C., Wiezoreck J., Song X., Winkler T., Bergen A., Rebsdorf A.V., Hansen J., Krause J., Putz H., Ammar A., Kyling H., Seitz E., Boy H., Brake M.t., Brutsaert P.
Ключевые слова: wind farms application, HTS, REBCO, coated conductors, coils, rotors, generators, fabrication, quench protection, test results
Laan D.C., Haugan T.J., Weiss J.D., Hossain M.S.A., Gao P., Yagotintsev K., Anvar V.A., Dhalle M.J., Nijhuis M.S.
Dhalle M., Bottura L., Goldacker W., Rossi L., Kario A., Rijk G.d., Kirby G., Kate H.H., Nugteren J.v., Gao P., Otten S., Nugteren B.v., Norder H.
Dhalle M., Bauer M., Kellers J., Wessel S., Buhrer C., Wiezoreck J., Song X., Krooshoop E., Tzabar N., Kate H.t., Winkler T., Bergen A., Hansen J., Krause J., Putz H., Yagotyntsev K., Andersen R., Boy H., Brake M.t., Brutsaert P., Kruse C., Kylling H., Pilas M., Rebsdorf A., Reckhard M., Seitz E.*10, Springer H.
Ключевые слова: wind farms application, rotating machines, generators, coils racetrack, design parameters, rotors, coils pancake, HTS, GdBCO, coated conductors, joint resistances, design, fabrication, test results, thermal performance, cryogenic systems, cooling technology, thermal conductivity, pressure dependence, cryogenic materials
Dhalle M., Bauer M., Kellers J., Wessel S., Wiezoreck J., Song X., Winkler T., Bergen A., Rebsdorf A.V., Hansen J., Krause J., Putz H., Bhrer C., Ammar A., Brake M., Kyling H., Seitz E., Boy H., Brutsaert P.
Ключевые слова: rotating machines, wind farms application, turbine, generators, HTS, modeling, numerical analysis, design parameters, geometry effects, flux density, torque, cryogenic systems, coils racetrack, design, critical caracteristics, critical current, temperature dependence, fabrication, photo, cooling technology
Ключевые слова: HTS, coated conductors, CORC cables, critical caracteristics, fabrication, REBCO, Jc/B curves, current-voltage characteristics, loads, cycling, geometry effects, test results
Tommasini D., Arbelaez D.*11, Auchmann B., Bajas H., Bajko M., Ballarino A., Barzi E.*10, Bellomo G., Benedikt M., Bermudez S.I., Bordini B., Bottura L., Brower L.*11, Buzio M., Caiffi B., Caspi S.*11, Dhalle M., Durante M., DeRijk G., Fabbricatore P., Farinon S., Ferracin P., Gao P., Gourlay S.*11, Juchno M.*11, Kashikhin V.*10, Lackner F., Lorin C., Marchevsky M.*11, Marinozzi V., Martinez T., Munilla J., Novitski I.*10, Ogitsu T., Ortwein R., Perez J.C., Petrone C., Prestemon S.*11, Prioli M., Rifflet J., Rochepault E., Russenschuck S., Salmi T., Savary F., Schoerling D., Segreti M., Senatore C., Sorbi M., Stenvall A., Todesco E., Toral F., Verweij A.P., Wessel S., Wolf F., Zlobin A.V.*10
Dhalle M., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., MOLODYK A., Long N., Willering G., Bajko M., Russenschuck S., Fazilleau P., Stenvall A., Ballarino A., Lorin C., Kario A., Rijk G.d., Bajas H., Kirby G., Kate H.t., Durante M., Lahtinen V., Markelov A., Nugteren J.v., Chiuchiolo A., Gao P., Petrone C., Perez J., Ruuskanen J., Mazet J., Murtomaki J., Pincot F., Fontalva A., Schmitz K., Contat P.
Ключевые слова: accelerator magnets, magnets dipole, coils insert, HTS, GdBCO, coated conductors, helium gas, Roebel conductors, cables, cooling technology, design parameters, quench detection, RRR parameter, training effect, degradation studies, critical caracteristics, current-voltage characteristics, n-value, temperature dependence, magnetic field distribution, quench current, current decay, joint resistances, test results
Broggi F., Chiuchiolo A., Dhalle M., Durante M., Fazilleau P., Fleiter J., Gao P., Goldacker W., Kario A., Kirby G., Haro E., Himbele J., Lorin C., Nugteren J.v., Petrone C., Rijk G.d., Ruuskanen J., Senatore C., Statera M., Stenvall A., Tixador P., Yang Y., Usoskin A., Zangenberg N.*10, Murtomaki J., Rossi L., Badel A., Bajas H., Bajko M., Ballarino A., Barth C., Betz U., Bottura L.
Ключевые слова: accelerator magnets, high field magnets, magnets dipole, modeling, numerical analysis, review, plans, HTS, coated conductors, REBCO, Roebel conductors, stacked blocks, coils model, YBCO, PLD process, IBAD process, critical caracteristics, critical current density, deposition setup, uniformity, critical current, ac losses, quench current, temperature dependence, test results
Volpini G., Fabbricatore P., Dhalle M., Bottura L., Ogitsu T., Farinon S., Verweij A.P., Ferracin P., Senatore C., Wessel S., Bellomo G., Sorbi M., Bordini B., Toral F., Bajko M., Savary F., Todesco E., Tommasini D., Auchmann B., Russenschuck S., Stenvall A., Ballarino A., Lorin C., Rijk G.d., Bajas H., Salmi T., Schoerling D., Buzio M., Lackner F., Durante M., Segreti M., Rochepault E., Martinez T., Bermudez S.I., Gao P., Marinozzi V., Benedikt M., Perez J., Rifflet J., Munilla J., Ortwein R., Prioli M., Wolf F.
Ключевые слова: FCC, magnets dipole, LTS, Nb3Sn, coils racetrack, model small-scale, design parameters
Kirby G., Rossi L., Badel A., Bajko M., Ballarino A., Bottura L., Dhalle M., Durante M., Fazilleau P., Fleiter J., Goldacker W., Haro E., Himbele J., Kario A., Langeslag S., Lorin C., Murtzomaki J., Nugteren J., Rijk G., Salmi T., Senatore C., Stenvall A., Tixador P., Usoskin A., Volpini G., Yang Y.*10, Zangenberg N.*11
Ключевые слова: HTS, REBCO, coated conductors, CORC cables, cable-in-conduit conductor, joints, termination, strands, design parameters, resistance, cooling technology, fabrication, new
Tixador P., Bottura L., Yang Y., Goldacker W., Scheuerlein C., Rossi L., Senatore C., Rutt A., Fleiter J., Ballarino A., Kario A., Dhalle M.M., Badel A., Barth C., Himbele J., Usoskin A*6.
Ключевые слова: accelerator magnets, HTS, YBCO, coated conductors, Roebel conductors, Bi2212, wires round, comparison, CORC cables, twisting, stacked blocks, critical caracteristics, critical current
Ключевые слова: CORC cables, cable-in-conduit conductor, HTS, design, fabrication, design parameters, REBCO, coated conductors
Nugteren J., Nugteren B., Gao P., Bottura L., Dhalle M., Goldacker W., Kario A., Kate H., Kirby G., Krooshoop E., Rijk G.d., Rossi L., Senatore C., Wessel S., Yagotintsev K., Yang Y.
Bottura L., Young E.A., Yang Y., Goldacker W., Ballarino A., Kario A., Dhalle M.M., Pelegrin J., Falorio I., Kirby G., Nugteren J.
Ключевые слова: HTS, YBCO, coated conductors, Roebel conductors, ac losses, magnetization, experimental results
Tixador P., Volpini G., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., Senatore C., Bajko M., Rijk G., Fazilleau P., Fleiter J., Stenvall A., Ballarino A., Lorin C., Kario A., Dhalle M.M., Badel A., Salmi T., Kirby G., Durante M., Zangenberg N., Haro E., Nugteren J.
Ключевые слова: cryogenic materials, mechanical properties, fatigue behavior, stress effects, strain effects, fibers, measurement technique
Ключевые слова: HTS, coated conductors, quench propagation, stability, quench energy, normal zone propagation, mechanical properties, loads, stress effects, strain effects, critical caracteristics, critical current, transverse stress, LTS, Nb3Sn, stress distribution, minimum quench energy, review, presentation
Dhalle M., Tomsic M., Krooshoop H.J., Sumption M.D., Rindfleisch M., Senatore C., Nijhuis A., Kulich M., Zhou C., Gao P.
Dhalle M., Wessel W.A., Collings E.W., Tomsic M., Krooshoop H.J., Sumption M.D., Rindfleisch M., Nijhuis A., Zhou C., Kate H.H., Offringa W., Bergen A.
Godeke A., Goldacker W., Dietderich D.R., Sumption M.D., Susner M.A., Dhalle M.M., Mentink M.G., Hellman F., Kate H.H.
Godeke A., Goldacker W., Dietderich D.R., Sumption M.D., Susner M.A., Dhalle M.M., Mentink M.G., Anders A., Hellman F., Putnam D., Slack J.L., ten Kate H.
Ключевые слова: ITER, LTS, Nb3Sn, strands, fracture behavior, transport currents, degradation studies, modeling
Flukiger R., Dhalle M., Kim J.H., Dou S.X., Yeoh W.K., Soltanian S., Wang X.L., Husnjak O., Babic E.(ebabic@phy.hr), Shcherbakova O., Senatore C.
Kovac P., Dhalle M., Holubek T.(tomas.holubek@savba.sk)
Piel H., Dhalle M., Polak M., Usak P., Demencik E.(eduard.demencik@savba.sk)
Ключевые слова: HTS, Bi2223/Ag, tapes multifilamentary, current distribution, numerical analysis, experimental results, lateral effects
Dhalle M., Polak M., Demencik E.(eduard.demencik@savba.sk), ten Kate H.
Ключевые слова: HTS, Bi2223/Ag, current distribution, measurement technique
Husek I., Dhalle M., Melisek T., Martinez E., Kovac P.(Pavol.Kovac@savba.sk)
Haken B., Dhalle M., Schwartz J., Laan D.C., Naveira L.M., Eck H.J.N., Metz A., Davidson M.W., ten Kate H.
Haken B., Lehtonen J., Dhalle M., Oomen M., Leghissa M., Nast R., Goldacker W., Hussennether V., Arndt T.J., Masti M.(mika.masti@tut.fi), Schmidt C., Bruzek C.-E., Allais A., Jorda J.-L., ten Kate H.
Haken B., Lehtonen J., Dhalle M., Oomen M., Leghissa M., Goldacker W., Joronen J., Zabara O., Arndt T.J., Masti M.(mika.masti@tut.fi), Schmidt C., Bruzek C.-E., Jorda J.-L., Zaragoza A., Opagiste C., ten Kate H.
Husek I., Kovac P.(elekkova@savba.sk), Dhalle M., Melisek T., Muller M., Ouden A.D.
Lehtonen J., Kovac P.(elekkova@savba.sk), Dhalle M., Masti M., Kopera L., Kawano K., Abell S., Metz B.
Ключевые слова: HTS, Bi2223/Ag, tapes multifilamentary, magnetic field distribution, measurement technique, magnetic properties
Husek I., Dhalle M., Melisek T., Ouden A.D., Kovac P.(Pavol.Kovac@savba.sk)
Kovac P., Husek I., Goldacker W., Dhalle M.(m.j.dhalle@tnw.utwente.nl), Weeren H., Wessel S., Ouden A., Schlachter S., ten Kate H.
Ключевые слова: MgB2/Fe, PIT process, wires monofilamentary, wires multifilamentary, geometry effects, critical current, strain effects, irreversibility fields, temperature distribution, magnetic field dependence, mechanical properties, experimental results, critical caracteristics, fabrication, magnetic properties
Lezza P., Haken B., Dhalle M., Goldacker W., Schlachter S.I., Weeren H., Ouden A., Eijnden, Wessel W.A.J., ten Kate H.
Husek I., Kovac P.(elekkova@savba.sk), Dhalle M., Melisek T., Eck H.J., Wessel W.A., Haken B.t.
Dhalle M., Haken B.t., Eck H.J.(h.j.n.vaneck@utwente.nl), Laan D.C., ten Kate H.
Ключевые слова: LTS, Nb3Sn, wires, Bi2223, MgB2, tapes, critical current, mechanical properties, measurement setup, experimental results, HTS, critical caracteristics, magnetic properties
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.